 HomeNewsWhere Is The Ignition Plug On A Motorcycle?

Where Is The Ignition Plug On A Motorcycle?

2023-05-18

The motorcycle Ignition Plug is generally located above the hood of the engine. This location may vary slightly by model and make, but most motorcycle glow plugs are located in the center of the engine section and are generally relatively easy to find. It should be noted that in order to avoid damage to the ignition plug and the engine, the replacement or inspection of the ignition plug should be carried out after the vehicle has cooled down. The following is a more detailed guide to the position of the glow plug, you can refer to the instructions below.

Ignition Plug

1. Locate the motorcycle's ignition plug wire: The ignition plug wire is mostly connected by a wire to the ignition plug. On most motorcycles, this wire is usually longer and needs to be passed through the frame or hood from other parts. Therefore, this wire needs to be found first.

2. Check the wire path: After finding the glow plug wire, follow the path of the glow plug wire to find the location of the glow plug. On many motorcycles, the glow plug is housed under a wide and short cylindrical or square cover, partly on top of the engine and partly above the hood. Usually this cover needs to be removed to access the glow plug.

3. Locate the glow plug: Once you have the directions to reach the glow plug, gently feel for its presence with your hand. Glow plugs are small, usually just a few millimeters in diameter, surrounding an inner insulating core and an outer metal threaded head.

4. Replace the ignition plug: If you need to replace the ignition plug, you need to cut off the power first, and then unscrew the old ignition plug. Insert a new glow plug and secure the thread into its hole. Finally, reconnect the glow plug wires and restart the engine to check that your motorcycle is working properly.

In conclusion, the ignition plug is one of the key components of a motorcycle engine. In order to avoid damage to the ignition plug and the motorcycle engine, the replacement or inspection of the ignition plug should be carried out after the vehicle has cooled down. If necessary, you can ask a professional to assist in replacing and adjusting the ignition plug. We also have different types of Auto Parts for sale.

Previous: The Nature Of Check Valve

Next: Common Check Valve Models